Home page
Need help with your order?

Item Detail

MURSQUE38X265R
LUMINA 65A SINGLE RED SQUEEGEE 3/8INX2IN G1 RE
Manufacturer Item: SQUE3/8X2-65R
Quantity Available: 66 IN
Sell Price: $0.79 IN
Next Quantity Break: 0
Next Quantity Break Discount: $0.00
Extended Price: $0.79
IN

 Extended Descriptions
 


APPLICATIONS

Lumina 65A Single Red Squeegee is a high performance triple durometer polyurethane squeegee blade. A three layered blade with printing characteristics of a 65, durometer edge with a stiffer 95 durometer center to minimize bending and maintain correct squeegee angle and blade flex.



PHYSICAL PROPERTIES

  • Lumina 65A Single Red Squeegee is ideal for printing thick and thin films, as well as minimising the use of expensive conductive inks.

  • Consistent squeegee quality results in longer print runs, less downtime and fewer rejects.

  • Ideal for multi-layer printing where tight registration control and printing accuracy is essential.

  • Qualities of this squeegee include soft pressure, high ink viscosity, high screen tension, good substrate adaptability, low ink deposit, and crisp image definition.



INSTRUCTIONS FOR HANDLING & USAGE

Lumina 65A Single Red Squeegee is best used for water base and discharge printing.  Using a softer squeegee blade can improve stencil life and increase ink saturation in the garment.  This will help improve color in both discharge and water base before and after washing of the apparel.


Grinding or Sharpening:
Prior to use, you will not be required to sharpen your Lumina 65A Single Red Squeegee. You should only sharpen a squeegee when it is clean, dry and has not been used for over 12 hours.

In Use:
Water base and discharge printing.  Using a softer squeegee blade can improve stencil life and increase ink saturation in the garment.  This will help improve color in both discharge and water base before and after washing of the apparel.


Cleaning Procedure:
Lumina 65A Single Red Squeegee should be cleaned immediately after use to prevent dried ink accumulation. When you are finished with the product, you must remove all of the remaining ink deposits from both the holder and squeegee. Leftover ink will cause marks, which can also decrease your print quality.

Clean your Lumina 65A Single Red Squeegee with a soft cloth and always make sure to wipe away from the edge of your squeegee. To help increase the lifespan of your Lumina 65A Single Red Squeegee, let your squeegee “rest” for up to 12 hours after cleaning and before you begin your next printing job.



INSTRUCTIONS FOR STORAGE

To extend the lifespan of your Lumina 65A Single Red Squeegee, store your squeegee between 15-25° C in dry conditions and away from any inks you already have. When your Lumina 65A Single Red Squeegee is exposed to high humidity, it will begin to absorb extra moisture and solvents that are in the air. You must store your Lumina 65A Single Red Squeegee flat, avoid leaving it rolled up.

If you plan to store your Lumina 65A Single Red Squeegee mounted in a holder, do not have it resting on the squeegee or allow the squeegee to touch anything else. You must also avoid leaving your Lumina 65A Single Red Squeegee or its holder in a solvent to soak. Soaking your Lumina 65A Single Red Squeegee red will cause swelling and loss of resilience.

When stored properly, a brand new, unused Lumina 65A Single Red Squeegee can last up to approximately two years.

 Warehouses
 
Warehouse Description Quantity Avail
10 Garston-East Hartford 0 IN
20 Garston-Haverhill 66 IN
30 Garston-Rochester 0 IN
#

Line Item Add

Item Number:
Quantity:
Unit of Measure: