Home page
Need help with your order?

Item Detail

Nazdar VF180 Thinner - 1GL
Manufacturer Item:
Quantity Available: 2 GL
Sell Price: $56.60 GL
Next Quantity Break: 0
Next Quantity Break Discount: $0.00
Extended Price: $56.60

 Extended Descriptions


Use Nazdar VF180 Thinner to improve the screen stability during hot climate conditions or for slower drying. Add up to 15% by weight. VF Series inks have excellent printability, opacity, fast drying and non - blocking characteristics and are recommended only for interior applications.


Use Nazdar VF180 Thinner to improve the screen stability during hot climate conditions or for slower drying. This product is for use with Nazdar VF Series Inks only. Add up to 15% by weight. All personnel mixing and handling these products must wear gloves and eye protection. Clean up spills immediately. If ink does come in contact with skin, wipe ink off with a clean, dry, absorbent  cloth (do not use solvent or thinner). Wash the affected area with soap and water.

Working Instructions:

Nazdar VF180 Thinner must be used to thin VF Inks to approximately 10% by weight prior to printing with Nazdar. Add only enough ink to the screen to be able to print for 5-10 minutes. Add additional ink in small increments throughout the print run to maintain screen stability. Thoroughly mix the ink prior to printing. Improper mixing can lead to inconsistent color and ink performance. Maintain ink temperature at 65°-90°F (18°-32°C) for optimum print and drying performance. Lower temperatures increase the ink viscosity, impairing flow and increasing film thickness. Elevated temperatures lower the ink viscosity, reducing print definition and film thickness.

Recommended Substrates For Nazdar VF180 Thinner:

  • Vinyl Banner

  • Vinyl Rigid

  • Static Cling

Adhesion Testing:

VF Series dries by solvent evaporation and jet dries at temperatures of 140-160°F (53-71°C). Good air circulation is necessary to remove the vaporized solvents. Multiple layers of ink may require longer drying times than a single layer.

  • Touch of ink surface – the ink should be smooth.

  • Thumb twist – the ink surface should not mar or smudge.

  • Scratch surface – the ink surface should resist scratching.

  • Cross hatch tape test – per the ASTM D-3359 method, use a cross hatch tool or a sharp knife to cut through ink film only; then apply 3M #600 clear tape on cut area, rub down, and rip off at a 180 degree angle. Ink should only come off in actual cut areas.


Store closed containers at temperatures between 65°-90°F (18°-32°C). Storing products outside of  these recommendations may shorten their shelf life. Ink taken from the press should not be returned to the original container; store separately to avoid contaminating unused ink. Standard VF Series items are useable for a period of at least 48 months from the date of manufacture.


Cleanup of Nazdar Nazdar VF180 Thinner:

  • Screen Wash (Prior to Reclaim): Use IMS201 Premium Graphic Screen Wash, IMS203 Economy Graphic Screen Wash, OR IMS206 Graphic Auto Screen Wash.

  • Press Wash (On Press): Use IMS301 Premium Graphic Press Wash.

Warehouse Description Quantity Avail
10 Garston-East Hartford 0 GL
20 Garston-Haverhill 2 GL
30 Garston-Rochester 0 GL

Line Item Add

Item Number:
Unit of Measure: