This screen is the Nortech Graphics Aluminum Frame. It features 140 Yellow Mesh, is 23 X 31 in, and has a 1 3/8 in Profile. This screen features 140 threads per inch. Comprised of 6063T5 welded aluminum alloy, each Nortech Frame ground smooth for flatness and is cut to ensure a watertight seal. Frame profiles range from 1” X 1” To 1-3/4” X 4”. Frames can have a wall thickness of either 1/16” or 1/8” and a size range of 3” X 3” up to 14’ X 14’. With mesh count ranging from 24 tpi to 420 tpi, we can provide any standard or customized screen to meet the needs of your shop.
INSTRUCTIONS FOR HANDLING & USE:
The Nortech Graphics Aluminum Frame is by far the most popular choice in the industry of screen printing. Dominating the market for its ability to withstand diversity of conditions, chemicals, these screens are used in printing shops all over the world. Resistance to warping and solvent absorption are among the many properties of this superior type of frame. The Nortech Graphics Aluminum Frame comes in a variety of stock and custom sizes as well as multiple gluing options for added strength and chemical resistance. Constructed from recycled and recyclable aluminum, these frames satisfy both economic and ecological interests as they are proudly produced right here in the USA.
The Nortech Graphics Aluminum Frame with 140 Yellow Mesh is the perfect choice for t-shirt screen printing. These aluminum frames will produce the best results, time and time again.
Product Characteristics of Nortech Graphics Aluminum Frame - 140 Yellow Mesh - 23 X 31 in:
Mesh Count: 140
Size: 23 x 31
Profile: 1 ? in
Nortech Graphics Aluminum Frames can be custom ordered to nearly specification or size. If your shop needs a custom dimension screen or one including specific adhesions or mesh count, contact us and we can have your custom screen assembled and shipped.
Mesh Adhesion Options:
The Nortech Graphics Aluminum Frame can be glued by means of two primary methods. There are also two additional options should your shop require screens with added strength for chemical resistance. Alternate glue types may result in extended mesh performance.
Cyanoacrylate Glue: A super high strength gluing option. This glue has a high tensile strength and will stand the test of time on both manual and automatic presses. It is resistant to most chemicals.
Two-part polyurethane: This product is applied with a multi-layer process to ensure a strong bond to the frame for extended performance. Also referred to as “Red Glue” it is the next level in both strength and chemical resistance. This catalyzed adhesive is resistant to all chemicals commonly used in the screen printing industry.
Permanent Block Out: This glue eliminates the need for temporary block-out on the frame and can be used in place of or with screen tape to prevent ink leakage. It is composed of the same material as Red Glue giving it the same strength and durability while blocking a 1.5-inch border around the edge of the mesh inside the frame.
Screen Boss: This glue is applied to the inside edge of the mesh where it meets the frame and creates a virtually indestructible bond between mesh and frame for premium resistance to chemical degradation and increased frame life. It is the most advanced addition to any glued frame due to its super-strength bond.
Additional Available Mesh Counts:
83 / 100 White
110 / 80 White
110 / 80 Yellow
123 / 70 White
137 / 64 White
156 / 64 White
156 / 64 Yellow
180 / 55 White
180 / 55 Yellow
195 / 55 Yellow
230 / 48 Yellow
255 / 40 Yellow
280 / 40 Yellow
305 / 34 Yellow
305 / 40 Yellow