Nortech Graphic Wood Frame - 196 Yellow Mesh - 18 X 22 in is hand made out of grade # 1 poplar hardwood. They feature an offset two finger mortise & tenon joint for superior strength and durability. By making the strongest wood frame on the market, we're also able to stretch some of the highest mesh tensions available for wood frames. Frames are finished with one coat of sanding sealer, which is then hand sanded. And the finishing is completed with a coat of clear varnish, for solvent and water resistance. Frame profiles range from 1” X 1” through 1-1/2” X 2-1/2” Sizes range from 3” X 3” to 120” in length. (*Wood frames are not recommended any Larger than 48” due to frame flex and cannot be guaranteed against warpage). Mesh counts range from 24 thru 460.
INSTRUCTIONS FOR HANDLING & USE:
Nortech Graphic Wood Frame - 196 Yellow Mesh - 18 X 22 in is constructed from recycled and recyclable wood, these frames satisfy both economic and ecological interests as they are proudly produced right here in the USA. Frames are finished with one coat of environmentally safe sanding sealer, which is then hand sanded.
The Nortech Graphic Wood Frame - 196 Yellow Mesh - 18 X 22 in is the perfect choice for t-shirt screen printing. These wooden frames can keep up with the fast-paced production in your shop.
Product Characteristics of Nortech Graphic Wood Frame - 196 Yellow Mesh - 18 X 22 in :
Mesh Count: 196
Size: 18 x 22
Nortech Graphics Wood Frames can be custom ordered to nearly specification or size. If your shop needs a custom dimension screen or one including specific adhesions or mesh count, contact us and we can have your custom screen assembled and shipped.
Mesh Adhesion Options:
The Nortech Graphics Wood Frame can be glued by means of two primary methods. There are also two additional options should your shop require screens with added strength for chemical resistance. Alternate glue types may result in extended mesh performance.
Cyanoacrylate Glue: A super high strength gluing option. This glue has a high tensile strength and will stand the test of time on both manual and automatic presses. It is resistant to most chemicals.
Two-part polyurethane: This product is applied with a multi-layer process to ensure a strong bond to the frame for extended performance. Also referred to as “Red Glue” it is the next level in both strength and chemical resistance. This catalyzed adhesive is resistant to all chemicals commonly used in the screen printing industry.
Permanent Block Out: This glue eliminates the need for temporary block-out on the frame and can be used in place of or with screen tape to prevent ink leakage. It is composed of the same material as Red Glue giving it the same strength and durability while blocking a 1.5-inch border around the edge of the mesh inside the frame.
Screen Boss: This glue is applied to the inside edge of the mesh where it meets the frame and creates a virtually indestructible bond between mesh and frame for premium resistance to chemical degradation and increased frame life. It is the most advanced addition to any glued frame due to its super-strength bond.
Additional Available Mesh Counts:
83 / 100 White
110 / 80 White
110 / 80 Yellow
123 / 70 White
137 / 64 White
156 / 64 White
156 / 64 Yellow
180 / 55 White
180 / 55 Yellow
195 / 55 Yellow
230 / 48 Yellow
255 / 40 Yellow
280 / 40 Yellow
305 / 34 Yellow
305 / 40 Yellow