Sprayway Fast Tack 384 is a high quality industrial grade spray adhesive that includes excellent heat resistance and is specially formulated for Flash-Cure applications. Even when Sprayway Fast Tack 384 Super Flash is exposed repeatedly to the high temperatures that cure plastisol inks require, it will still remain tacky and not transfer or allow the fabric to shift during the whole screen-printing process.
Sprayway Fast Tack 384 Super Flash is specially formulated screen printing pallet adhesive for flash-cure applications
Perfect for temperatures required to cure plastisol inks and remains tacky
Always safe to use on any fabric
Sprayway Fast Tack 384 is a tan solvent that comes in a 20 oz can with a net weight of 14 oz.
Does not allow transferral or shifting during screen printing process
Sprayway Fast Tack 384 Super Flash has exceptional heat resistance
Flash point is -156.0 °F (-104.4 °C) Propellant estimated.
INSTRUCTIONS FOR HANDLING & USE
Sprayway Fast Tack 384 is a pressurized container. You must refrain from piercing or burning the container after use. Do not use Sprayway Fast Tack 384 if the spray button is missing or defective. Any equipment you apply Sprayway Fast Tack 384 to, must be grounded. When handling your Sprayway Fast Tack 384, wear protective gear covering eyes, skin or clothing as well as having adequate ventilation.
It is important to note that the Sprayway Fast Tack 384 Super Flash adhesive spray contains high solids and some adhesive build-up will occur within the spray tip. If fresh, this can be easily removed by wiping with a tissue. However, dried build-up can be cleaned up with thinner or Sprayway C-60 Solvent Degreaser. After the spraying is done, you must turn the can upside down and spray for two seconds in order to keep the valve from plugging.
You can either reclaim or dispose of your Sprayway Fast Tack 384 after use. Disposal of your Sprayway Fast Tack 384 must occur at a licensed waste disposal site. Do not try to wash Sprayway Fast Tack 384 down the drain. It is not allowed to drain into sewers or water supplies in the event that it may contaminate ponds, waterways or ditches. Always check with your local disposal regulations before taking any action with your Sprayway Fast Tack 384.
INSTRUCTIONS FOR STORAGE
Your Sprayway Fast Tack 384 must be protected and kept away from sunlight. Do not expose your Sprayway Fast Tack 384 to temperatures exceeding 50°C/122 °F. Refrain from puncturing, incinerating or crushing your container during storage. Do not handle or store near an open flame, heat or ignition source. Sprayway Fast Tack 384 can produce static charge that can lead to a spark or become an ignition source, so always be careful with where you store it. Refrigeration is recommended.