Camie 385 is a clear pressure sensitive webbing. It will never wrinkle while in use, and is made specifically for use on high density garments such as fleece.
Camie 385 has a lace spray pattern
Clear in appearance
Mint odor when wet
Net Weight of 12 oz
Camie 385 has a maximum service temperature of 110 °F
Camie 385 is a Isohexane and Acetone blend solvent system
Repositionable adhesive that can adhere most screen printable fabrics to the platten.
VOC compliant for CA and OTC
INSTRUCTIONS FOR HANDLING & USE
Make sure that before handling Camie 385 you have read all the proper safety precautions and are sure that you understand them completely. You should never make any attempt to use Camie 385, if the spray button is either missing or defective. Be careful not to breathe in the gas, dust, mist, vapors, sprays, or fumes, when using Camie 385. Avoid allowing this product to make contact with the skin or eyes, and be aware of the proper safety protocols if it does. Use this product only when you are in a well ventilated area. Restrain from prolonged exposure to Camie 385.
Camie 385 is a very useful adhesive when it comes to multicolored designs or even during single color prints. You should adhere your garment to a platen in the event that your first pass with the squeegee fails to make solid coverage, and you find it necessary to drop the screen again for a second pass. A liquid glue can be used if you are doing a lot of flash curing, or on a platen.
Proper disposal should be in accordance with all applicable regulations. This product should not be released into the environment, where it can have lasting harmful effects. Dispose of this product at a licensed waste disposal site to collect and reclaim or dispose sealed containers. Do not crush, puncture, or incinerate containers. For your safety, follow label warnings when disposing of this product, because the empty containers still may contain residue. This product is harmful to aquatic life with possible long lasting effects.
Stability and Reactivity:
This product is non-reactive and stable when it is under normal conditions for use, transportation and storage. Hazardous polymerization does not occur with Camie 385. In any case, it is still advised that Camie 385 does not have contact with incompatible materials, sources of ignition, flames, and sparks.
INSTRUCTIONS FOR STORAGE
The proper way to store Camie 385 is in its original pressurized container, and inside a well ventilated place. Do not allow this product to be exposed to extreme heat greater than 122 °F or 50 °C, and make sure that it is kept out of direct sunlight. Keep Camie 385 away from any incompatible materials, that it should not be stored with.