Home page
Need help with your order?

Item Detail

TBPU5003
Trelleborg Unitex Ulon HP Red Composite Squeegee Blade - 1 in
Manufacturer Item: 1096248
Quantity Available: 768 IN
Sell Price: $1.49 IN
Next Quantity Break: 0
Next Quantity Break Discount: $0.00
Extended Price: $1.49
IN

 Extended Descriptions
 

APPLICATIONS

For most screen print applications, Trelleborg Unitex Ulon HP Red will provide optimum performance reducing ink usage and screen breakages. Made from NDI (Napthalene Diisocanate) polyeurethane technology), Trelleborg Unitex Ulon HP Red has the highest level of chemical and abrasion resistance.

Trelleborg Unitex Ulon HP is recognized as working well with most solvent based, plastisol and water based inks, offering great wear and tear resistance.


PHYSICAL PROPERTIES

  • Trelleborg Unitex HP Red is ideal for printing thick and thin films, as well as minimising the use of expensive conductive inks.

  • Consistent squeegee quality results in longer print runs, less downtime and fewer rejects.

  • Ideal for multi-layer printing where tight registration control and printing accuracy is essential.

  • Hardness Shore level of 60-65° with a D-Cut profile.

  • Qualities of this squeegee include medium pressure, low ink viscosity, low screen tension, good substrate adaptability, high ink deposit, and fair image definition.


INSTRUCTIONS FOR HANDLING & USAGE

Trelleborg Unitex Ulon HP should not be stored in sunlight, bright light or UV light. Exposure to any form of light will affect the squeegee color, making it darker, but it will not change the performance of the squeegee.  When you are ready to use your Trelleborg Unitex Ulon HP, leave the roll flat for a full 24 hours. This way, the squeegee will have time to relax and be ready for use.


Primarily, the Trelleborg Unitex Ulon HP is used in many electronic screen printing applications, mostly high end consumer touch panel devices like mobile phones and tablets. It can also be used for electronics, graphics, textiles, glass, bottles/containers or solar cells.


Grinding or Sharpening:
Prior to use, you will not be required to sharpen your Trelleborg Unitex Ulon HP Red. You should only sharpen a squeegee when it is clean, dry and has not been used for over 12 hours.

In Use:
Overtime your Trelleborg Unitex Ulon HP Red will harden, so it is best to test your old squeegees regularly. Never use an old squeegee that becomes 5 to 10 degrees more than the original hardness. It is best practice to never use your Trelleborg Unitex Ulon HP Red without ink. This will destroy the printing edge of your squeegee after a few passes.

During long runs, the sharp edge of your Trelleborg Unitex Ulon HP Red may be lost, and you will need to plan to swap out your squeegee early. The Trelleborg Unitex Ulon HP Red features a ultra sharp printing edge that provides not only great print quality, but accuracy helping to deposit printed layers between 70µm and 10µm (microns). Remember that rounded edges use and deposit more ink during the screen printing process.


Cleaning Procedure:
Trelleborg Unitex Ulon HP should be cleaned immediately after use to prevent dried ink accumulation. When you are finished with the product, you must remove all of the remaining ink deposits from both the holder and squeegee. Leftover ink will cause marks, which can also decrease your print quality.

Clean your Trelleborg Unitex Ulon HP Red with a soft cloth and always make sure to wipe away from the edge of your squeegee. To help increase the lifespan of your Trelleborg Unitex Ulon HP Red, let your squeegee “rest” for up to 12 hours after cleaning and before you begin your next printing job.


INSTRUCTIONS FOR STORAGE

To extend the lifespan of your Trelleborg Unitex Ulon HP Red, store your squeegee between 15-25° C in dry conditions and away from any inks you already have. When your Trelleborg Unitex Ulon HP Red is exposed to high humidity, it will begin to absorb extra moisture and solvents that are in the air. You must store your Trelleborg Unitex Ulon HP Red flat, avoid leaving it rolled up.

If you plan to store your Trelleborg Unitex Ulon HP Red mounted in a holder, do not have it resting on the squeegee or allow the squeegee to touch anything else. You must also avoid leaving your Trelleborg Unitex Ulon HP Red or its holder in a solvent to soak. Soaking your Trelleborg Unitex Ulon HP red will cause swelling and loss of resilience.

When stored properly, a brand new, unused Trelleborg Unitex Ulon HP Red can last up to approximately two years.

 Warehouses
 
Warehouse Description Quantity Avail
10 Garston-East Hartford 0 IN
20 Garston-Haverhill 768 IN
30 Garston-Rochester 0 IN
#

Line Item Add

Item Number:
Quantity:
Unit of Measure: