Home page
Need help with your order?

Item Detail

International Coatings 7014 Legacy White Plastisol Ink - 30 GL Drum
Manufacturer Item:
Quantity Available: 3 30D
Sell Price: $1,977.92 30D
Next Quantity Break: 0
Next Quantity Break Discount: $0.00
Extended Price: $1,977.92

 Extended Descriptions


This product is the 30 Gallon Drum of International Coatings 7014 Legacy White Plastisol Ink. This ink is a low bleed, high pigment, fast ashing, low tack, non phthalate plastisol screen printing ink. This ink has a cream viscosity medium body, making the ink suitable for auto and manual presses. This ink offers superior performance through fast production speeds, and its brightness and opacity.


7014 Legacy White is a low bleed ink, not a non-bleed ink. On some types of fabric, bleeding or dye migration may occur. Always test print the fabric to be printed before beginning production. It is best to do some long term testing on fabrics to determine if they are going to bleed. Bleeding or dye migration may not occur right away. Adding any reducers or additives can lower bleed resistance, reduce opacity, or increase cure times of the ink. STIR the ink prior to printing on press and after addition of reducers or additives. Test dryer temperatures and wash test printed product before and during a production run.


  • Opaque Matte finish

  • Smooth surface

  • Fast-flashing with minimal tack

  • Prints through fine meshes

  • Easily printed on manual or automatic presses

Spot Flashing With International Coatings 7014 Legacy White Plastisol Ink :

International Coatings 7014 Legacy White Plastisol Ink  will spot dry with a very low after flack tack. Dwell time is dependent on the spot dryer used. In some cases, you may have to lower the heat of the spot cure unit because too much heat may actually make the ink tacky. When you spot dry, you are only partially fusing or gelling the surface of the ink. The ink should be just dry to the touch, with no lift-off, but not totally fused. Totally fusing the underprint white may cause inter-coat adhesion problems with the inks printed on top of the white ink. Final fusing or curing occur in the dryer.

Additional information For International Coatings 7014 Legacy White Plastisol Ink:

7014 Legacy White, compared to other opaque whites, prints more easily. You will find that a finer screen mesh can be used the same opacity as a more open mesh. This means less ink will be needed, a real money saver in terms of ink usage. It also means a softer hand on ashed fabrics.

Technical Specifications of International Coatings 7014 Legacy White Plastisol Ink:

Fabric Types: 100% cotton, 50/50 cotton/poly blends, some polyesters

Mesh: Count: 60 - 230 t/in (24 - 90 t/cm) Monofilament

Squeegee: Durometer: 65-75, Sharp Edge

Flash & Cure Temperatures: 325º F (163º C) for 1 minute, Dependent on dryer speed and temperature settings.

Storage: 65-90°F (18-32°C) Avoid direct sunlight. Keep container well sealed.

Clean Up: Any Eco Friendly plastisol screen wash.

Warehouse Description Quantity Avail
10 Garston-East Hartford 0 30D
20 Garston-Haverhill 3 30D

Line Item Add

Item Number:
Unit of Measure: