Easiway EasiSolv 500 Stencil Remover Concentrate 1:25 is a revolutionary, liquid, emulsion remover concentrate which is engineered to quickly and aggressively dissolve all direct emulsions, capillary and high density films with ease. This product has no VOCs. This product mixes with water 1:10 and up to 1:50. EasiSolv 500 degreases as it dissolves stencils, eliminating the additional step and expense of degreasing chemicals. This is the lowest cost emulsion remover on the market and the only concentrate which ships as non hazardous.
INSTRUCTIONS FOR HANDLING & USE:
EasiSolv 500 is the most flexible concentrate in the industry. It can be mixed at ratios from 1 part EasiSolv 500 to 50 parts water, down to 1 part EasiSolv 500 to 10 parts water. The concentration of liquid depends on your needs. Easiway EasiSolv 500 Stencil Remover Concentrate 1:25 does not ship as a hazardous commodity, reducing shipping and storage hazards and expense. This provides the ultimate in reclaiming economy. EasiSolv 500 is workplace approved, which allows compliance with the strictest standards for employee exposure, air emissions and effluent disposal.
EasiSolv 500 may be easily used in a dip tank, as a one step ink and emulsion remover adding substantial economy to the screen reclaiming process.EasiSolv 500 dissolves readily with water, requiring no mixing, which makes dilution simple and fast. EasiSolv 500 is packed with additives, enabling the product to penetrate the toughest, water resistant and work hardened emulsions and films.
Application for Use in a Dip Tank:
Step One: Mix EasiSolv 500 at a ratio of 1:10 with water in a plastic tank.
Step Two: Scrape excess ink from screen.
Step Three: Place screen in dip tank.
Step Four: Let soak in tank until the emulsion/film loosens from screen, usually 2-4 minutes.
Step Five: High pressure rinse screen, then flood rinse.
Application for Manual Use:
Step One: Mix EasiSolv 500 from 1:10 up to 1:50 with water.
Step Two: Apply EasiSolv 500 by brush, wipe, scrub pad or spray to both sides of emulsion/film, after ink has been removed.
Step Three: High pressure rinse both sides of the screen.
Step Four: Flood rinse entire screen with low pressure rinse from the top to remove any debris, splash back and chemical residue.
If stubborn stains remain, apply a stain remover and high pressure rinse.
INSTRUCTIONS FOR STORAGE
Store in a dry, cool, and well-ventilated place away from incompatible materials such as caustics. Preferable storage is a restricted area designed for acids and oxidizers. Do not freeze. Keep the container tightly closed of your Easiway EasiSolv 500 Stencil Remover Concentrate 1:25.
Disposal of Your Easiway EasiSolv 500 Stencil Remover Concentrate 1:25