Easiway EasiSolv 55 Stencil Remover Concentrate is a revolutionary, highly concentrated, extremely cost effective, liquid solution designed to aggressively dissolve direct, direct/indirect emulsions, as well as capillary films, dual-cure systems, pure photopolymer and direct projection emulsion systems. EasiSolv 55 Stencil Remover Concentrate will dissolve stencils and provide easy washout with water from all types of screen mesh. This product has no VOCs.
INSTRUCTIONS FOR HANDLING & USE:
Easiway EasiSolv 55 Stencil Remover Concentrate is an economical liquid concentrate, which easily mixes with water at a ratio of 1 part chemical to 30 parts water, up to 1 part chemical to 55 parts water, providing unparalleled cost effectiveness. Easiway EasiSolv 55 Stencil Remover Concentrate is a biodegradable liquid which simplifies use, disposal and environmental concerns.
Stencil Remover Preparation:
Easiway EasiSolv 55 Stencil Remover Concentrate mixes with water faster and more thoroughly than powders, which eliminates the waste generated by undissolved solids. Dilute 1 part Easiway EasiSolv stencil remover concentrate with 30 parts water before use.
Easiway EasiSolv 55 Stencil Remover Concentrate is an aggressive stencil stripper on all commonly used stencil systems which will cover the majority of needs, on all mesh, without leaving emulsion haze.
Application for Use in a Dip Tank:
Step One: Mix EasiSolv 55 at a ratio of 1:30 up to 1:55 with water in a plastic tank.
Step Two: Scrape excess ink from screen.
Step Three: Place screen in dip tank.
Step Four: Let soak in tank until the emulsion/film loosens from screen, usually 2-4 minutes.
Step Five: High pressure rinse screen, then flood rinse.
Application for Manual Use:
Step One: Mix Easiway EasiSolv 55 Stencil Remover Concentrate at a ratio of 1:30 up to 1:55 with water in a plastic container.
Step Two: Apply solution by brush, wipe, scrub pad or spray to both sides of emulsion/film, after ink has been removed.
Step Three: High pressure rinse both sides of the screen.
Step Four: Flood rinse entire screen with low pressure rinse from the top to remove any debris, splash back and chemical residue.
If stubborn stains remain, apply a stain remover and high pressure rinse.
INSTRUCTIONS FOR STORAGE
Keep the container of Easiway EasiSolv 55 Stencil Remover Concentrate tightly closed. Store in a dry, cool, and well-ventilated place away from incompatible materials such as caustics. Preferable storage is a restricted area designed for acids and oxidizers.
Disposal of Your Easiway EasiSolv 55 Stencil Remover Concentrate