PolyOne Wilflex 11335PFW EPIC Sprint White Ink is a non-phthalate premium white ink that delivers superior printability and visual appearance. Epic Sprint White can be used as an underbase flash white or as a highlight white. It is characterized by an extremely fast flash time with minimal after-tack, excellent fiber mat-down, high brightness, and matte appearance. Epic Sprint White is designed for applications on 100% cotton fabrics.
INSTRUCTIONS FOR HANDLING & USAGE:
Use consistent, high-tensioned screen mesh to optimize performance properties. To increase production speeds, use finer mesh counts for the flash plate to decrease gel time. Set flash dwell times on heated pallets to simulate production. Adjust your settings so that the ink is just dry to the touch.
Smooth, bright surface.
Fast flashing with minimal after-tack.
Use as a first-down, underbase flash white or an overprint stand-alone white.
Printing Tips for PolyOne Wilflex 11335PFW EPIC Sprint White Ink:
Perform fusion tests before production. Failure to cure ink properly may result in poor wash fastness, inferior adhesion and unacceptable durability. Ink gel and cure temperatures should be measured using a Thermoprobe placed directly in the wet ink film and verified on the production run substrate(s) and production equipment. It is the responsibility of the printer to determine that the correct ink has been selected for a specific substrate and the application processes meet your customer’s standards or specifications. Stir plastisols before printing. Do not dry clean, bleach or iron printed area.
Non Contamination of PolyOne Wilflex 11335PFW EPIC Sprint White Ink:
Do not add or mix non-Epic inks, additives or extenders with Epic inks. All buckets, palette knives, stirring apparatus, squeegees, flood bars and screens must be cleaned properly and free of phthalates and pvc containing inks. Non-phthalate emulsions and pallet adhesives must be used. Failure to follow these precautions may cause phthalate contamination in violation of consumer protection laws and regulations.
Technical Specifications of PolyOne Wilflex 11335PFW EPIC Sprint White Ink:
Fabric Types: 100% cotton
Mesh: Counts: 86-305 t/in (34-120 t/cm) Tension: 25-35 n/cm2
Squeegee: Durometer: 60-70, 60/90/60 Edge: Square, Sharp Stroke: Hard flood, Fast stroke *Do not use excess squeegee pressure.
Non-Phthalate Stencil: Direct: 2 over 2 Capillary/Thick Film: N/A Off Contact: 1/16” (.2cm)
Flash & Cure Temperatures: Flash: 220°F (105°C) Cure: 300°F (150°C)
Storage: 65-90°F (18-32°C) Avoid direct sunlight. Use within one year of receipt.Clean Up: Ink degradent or press wash.