Home page
Need help with your order?

Item Detail

FXG10989PFXLG
PolyOne Wilflex 10989PFXLG EPIC Liquid Gold Ink - 1 GL
Manufacturer Item: FO20018678Z1
Quantity Available: 16 GL
Sell Price: $150.50 GL
Next Quantity Break: 0
Next Quantity Break Discount: $0.00
Extended Price: $150.50
GL

 Extended Descriptions
 


APPLICATIONS

PolyOne Wilflex 10988PFXLS EPIC Liquid Silver Ink  is non-phthalate plastisol ink specially formulated to produce an opaque, vibrant metallic shine effect. Epic Liquid Gold is ready for use straight out of the container and can be used with both flat and high density graphics.



INSTRUCTIONS FOR HANDLING & USAGE:

Can be printed through flat screen meshes or high density films. Can be printed direct to garment or over an underbase. Single print or print-flash-print can be used to apply ink to fabric. Best results achieved using recommended mesh counts. For best results, evaluate the entire handling of garments that contain metallic inks including; printing, curing, stacking hot shirts and packaging of hot shirts, and handling where abrasion to the surface may occur.



PHYSICAL PROPERTIES:

  • Super-shine metallic ink.

  • Can be used straight out of the container.

  • Excellent stretch properties.

  • Epic Liquid Gold can be printed on all colored fabrics with dark colored fabrics giving best results.


Printing Tips for PolyOne Wilflex 10989PFXLG EPIC Liquid Gold Ink:

Perform fusion tests before production. Failure to cure ink properly may result in poor wash fastness, inferior adhesion and unacceptable durability. Ink gel and cure temperatures should be measured using a Thermoprobe placed directly in the wet ink film and verified on the production run substrate(s) and production equipment. It is the responsibility of the printer to determine that the correct ink has been selected for a specific substrate and the application processes meet your customer’s standards or specifications. Avoid over flashing as it can result in poor intercoat adhesion of colors. Use an appropriate low-bleed underbase on polyester fabrics. Pretest all fabrics for dye migration. Metallic inks reflect infrared heat and a forced air dryer is recommended to achieve proper cure of the entire ink deposit. Metallic inks are very susceptible to abrasion of the ink surface. This may result in particles rubbing off, discoloration and/or dulling of the image–even if the ink is fully cured. Avoid contact between metallic inks and other inks that have a sticky surface (hot or cold). Metallic flakes transfer onto sticky surfaces even if the ink is cured. For best results, follow guidelines for proper cure of entire ink film. Hand wash garments in cold water with a non-phosphate soap, such as Woolite. Avoid using a tumble dryer. Hang or air dry garments to avoid surface abrasion. Label garments with suggested wash instructions. Stir plastisols before printing. Do not dry clean, bleach or iron printed area.


Non Contamination of PolyOne Wilflex 10989PFXLG EPIC Liquid Gold Ink:

Do not add or mix non-Epic inks, additives or extenders with Epic inks. All buckets, palette knives, stirring apparatus, squeegees, flood bars and screens must be cleaned properly and free of phthalates and pvc containing inks. Non-phthalate emulsions and pallet adhesives must be used. Failure to follow these precautions may cause phthalate contamination in violation of consumer protection laws and regulations.


Technical Specifications of PolyOne Wilflex 10989PFXLG EPIC Liquid Gold Ink:

Fabric Types: 100% cotton, cotton blends

Mesh: Counts- 86-230 t/in (34-91 t/cm) Tension- 25-35 n/cm2

Squeegee: 60-70, 60/90/60 Edge: Square, Sharp Stroke: Medium-Fast *Do not use excess squeegee pressure.

Non-Phthalate Stencil: 2 over 2 Capillary/Thick Film: up to 400 microns Off Contact: 1/16” (.2cm)

Flash & Cure Temperatures: 220°F (105°C) Cure: 320°F (160°C)

Storage: 65-90°F (18-32°C) Avoid direct sunlight. Use within one year of receipt.

Clean Up: Ink degradent or press wash.

 Warehouses
 
Warehouse Description Quantity Avail
10 Garston-East Hartford 0 GL
20 Garston-Haverhill 16 GL
30 Garston-Rochester 0 GL
#

Line Item Add

Item Number:
Quantity:
Unit of Measure: