Home page
Need help with your order?

Item Detail

FXG11835PFW
PolyOne Wilflex 11835PFW EPIC Quick White Ink - 1 GL
Manufacturer Item: 11835PFW
Quantity Available: 9 GL
Sell Price: $93.00 GL
Next Quantity Break: 0
Next Quantity Break Discount: $0.00
Extended Price: $93.00
GL

 Extended Descriptions
 


APPLICATIONS

PolyOne Wilflex 11835PFW EPIC Quick White Ink is a non-phthalate premium white ink that delivers superior printability, premium aesthetics and un-matched soft hand feel. EPIC Quick White can be used as an underbase flash white or as a highlight white. It is characterized by an extremely fast flash time with minimal after-tack, excellent fi ber mat-down, high brightness and matte appearance. EPIC Quick White is designed for applications on 100% cotton and cotton/poly blends where moderate bleed resistance is required.



INSTRUCTIONS FOR HANDLING & USAGE:

Use consistent, high-tensioned screen mesh to optimize performance properties.  To increase production speeds, use finer mesh counts for the flash plate to decrease gel time. Set flash dwell times on heated pallets to simulate production. Adjust your settings so that the ink is just dry to the touch.



PHYSICAL PROPERTIES:

  • Premium soft hand feel

  • High opacity

  • Smooth, bright surface

  • Matte finish

  • Fast flashing with minimal after-tack

  • Use as a first-down, underbase flash white or an overprint stand-alone white

  • Prints easily through recommended meshes


Printing Tips for PolyOne Wilflex 11835PFW EPIC Quick White Ink:

Stir plastisols before printing.  Do not dry clean, bleach or iron printed area.  Perform fusion tests before production. Failure to cure ink properly can result in poor wash fastness, inferior adhesion and unacceptable durability.  Gel and cure temperatures for ink should be measured using a Thermoprobe device placed directly in the wet ink film and verified on the substrate(s) and equipment to be used for production.  It is the responsibility of the printer to determine that the correct ink has been selected for a specific substrate and the application processes meet the printer’s customer standards or specifications.  Curing is the responsibility of each printer to confirm that the print is fully cured. PolyOne’s cure recommendations are not a guarantee or warranty, but merely suggested starting points for curing evaluations as explained above.  When printing on garments that contain certain dyes, you must pre-test for the potential of ghosting. Please refer to our website for more information on this issue. Wilflex products have been carefully designed to perform within a given viscosity range, and any dramatic change in viscosity is probable to result in a change in printing characteristics.


Non Contamination of PolyOne Wilflex 11835PFW EPIC Quick White Ink:

Do not add or mix non-Epic inks, additives or extenders with Epic inks. All buckets, palette knives, stirring apparatus, squeegees, flood bars and screens must be cleaned properly and free of phthalates and pvc containing inks. Non-phthalate emulsions and pallet adhesives must be used. Failure to follow these precautions may cause phthalate contamination in violation of consumer protection laws and regulations.


Technical Specifications of PolyOne Wilflex 11835PFW EPIC Quick White Ink:

Fabric Types: 100% cotton, cotton/poly blends

Mesh: Counts: 86-305 t/in (34-120 t/cm) Tension: 25-35 n/cm2

Squeegee: Durometer: 60-70, 60/90/60 Edge: Square, Sharp Stroke: Hard fl ood, Fast stroke *Do not use excess squeegee pressure.

Non-Phthalate Stencil: Direct: 2 over 2 Capillary/Thick Film: N/A Off Contact: 1/16” (.2cm)

Flash & Cure Temperatures: Flash: 220°F (105°C) Cure: 300°F (150°C)

Storage: 65-90°F (18-32°C) Avoid direct sunlight. Use within one year of receipt.

Clean Up: Ink degradent or press wash.

 Warehouses
 
Warehouse Description Quantity Avail
10 Garston-East Hartford 0 GL
20 Garston-Haverhill 9 GL
30 Garston-Rochester 0 GL
#

Line Item Add

Item Number:
Quantity:
Unit of Measure: