Home page
Need help with your order?

Item Detail

FXG12600PFX
PolyOne Wilflex 12600PFX EPIC Rebel Flesh Ink - 1 GL
Manufacturer Item: FO20021961Z1
Quantity Available: 11 GL
Sell Price: $100.00 GL
Next Quantity Break: 0
Next Quantity Break Discount: $0.00
Extended Price: $100.00
GL

 Extended Descriptions
 


APPLICATIONS

PolyOne Wilflex 12600PFX EPIC Rebel Flesh Ink is a non-phthalate, high performance, low-bleed white ink for application on 100% cotton and cotton/polyester blends. Rebel Flesh  premium opacity, optical brightness, fiber mat down, low gloss level, and good flash properties permit it to be utilized as a first down flash white or as a hi-light color.



INSTRUCTIONS FOR HANDLING & USAGE:

For best results, Print - Flash - Print followed by color. For one-hit opacity through course meshes, use a coating procedure that builds a thick, even stencil to ensure a good column height of ink. Use consistent, high-tensioned screen mesh to optimize performance properties.



PHYSICAL PROPERTIES:

  • Opaque Matte finish

  • Smooth surface

  • Fast-flashing with minimal tack

  • Prints through fine meshes

  • Easily printed on manual or automatic presses


Printing Tips for PolyOne Wilflex 12600PFX EPIC Rebel Flesh Ink:

Perform fusion tests before production. Failure to cure ink properly may result in poor wash fastness, inferior adhesion and unacceptable durability. Ink flash and cure temperatures should be measured using a Thermoprobe placed directly in the wet ink film and verified on the production run substrate(s) and production equipment. It is the responsibility of the printer to determine that the correct ink has been selected for a specific substrate and the application processes meet your customer’s standards or specifications. Pre-test all fabrics for dye migration. Some fabric dyes may cause ghosting effect, properly test. fAvoid over flashing as it can result in poor intercoat adhesion of colors. Wilflex products have been carefully designed to perform within a given viscosity range and any dramatic change in viscosity may result in a change in printing characteristics Stir plastisols before printing. Do not dry clean, bleach or iron printed area.


Non Contamination of PolyOne Wilflex 12600PFX EPIC Rebel Flesh Ink:

Do not add or mix non-Epic inks, additives or extenders with Epic inks. All buckets, palette knives, stirring apparatus, squeegees, flood bars and screens must be cleaned properly and free of phthalates and pvc containing inks. Non-phthalate emulsions and pallet adhesives must be used. Failure to follow these precautions may cause phthalate contamination in violation of consumer protection laws and regulations.


Technical Specifications of PolyOne Wilflex 12600PFX EPIC Rebel Flesh Ink:

Fabric Types: 100% cotton, cotton/poly blends

Mesh: First down white: 86 - 156 t/in (34 - 61 t/cm) Tension: 25-35 n/cm

Squeegee: Durometer: 60-90, 70/90, 70/90/70 Edge: Sharp Stroke: Hard flood, Fast stroke *Do not use excess squeegee pressure.

Non-Phthalate Stencil: Direct: 2 over 2 Capillary/Thick Film: N/A Off Contact: 1/16” (.2cm)

Flash & Cure Temperatures: Flash: 220°F (105°C) 3 - 5 seconds Cure: 300 °F (150 °C) Peak

Storage: 65-90°F (18-32°C) Avoid direct sunlight. Use within one year of receipt.

Clean Up: Ink degradent or press wash.

 Warehouses
 
Warehouse Description Quantity Avail
10 Garston-East Hartford 1 GL
20 Garston-Haverhill 10 GL
30 Garston-Rochester 0 GL
#

Line Item Add

Item Number:
Quantity:
Unit of Measure: