Home page
Need help with your order?

Item Detail

International Coatings 900 Series Catalyst - 2 OZ 
Manufacturer Item:
Quantity Available: 14 EA
Sell Price: $13.13 EA
Next Quantity Break: 0
Next Quantity Break Discount: $0.00
Extended Price: $13.13

 Extended Descriptions


The 900 Series Nylon Ink must be mixed with the 900 Catalyst before printing on Nylon. Catalyst is available in 2 ounce, 8 ounce, and 1 gallon containers and must be purchased separately. The catalyst helps the ink adhere better to hard-to-print fabrics such as nylon.  However, there are also other uses such as adding catalyst to our 3820 Flock Adhesive to promote better adhesion of the flocking fibers.


Ink may be used immediately after mixing. Do not mix more ink than is needed for a job. Do not under-catalyze the ink with International Coatings 900 Series Catalyst. Pot life of mixed ink is 4 to 8 hours. Over-catalyzation will shorten the pot life. If printing on cotton, it is not necessary to catalyze the ink with International Coatings 900 Series Catalyst.

Mixing Proportions For International Coatings 900 Series Catalyst:

By volume: 16 parts ink to 1 part catalyst

By weight: 20 parts ink to 1 part catalyst

1 ounce of catalyst: to 1 pint of ink

2 ounces of catalyst: to 1 quart of ink

8 ounces of catalyst: to 1 gallon of ink

Technical Specifications of 900 Series inks:

Fabric Types: Nylon, 100% Cotton, 50/50 Cotton Polyester blends, Nonwoven Polypropylene Bags.

Mesh Count: 86-305 t/in (34-120 t/cm) monofilament

Squeegee: 70-80 Durometer Sharp edge

Flash & Cure Temperatures: 300°F to 325°F (149°C to 163°C) entire ink film

Storage: 65-90°F (18-32°C) Avoid direct sunlight. Keep container well sealed.

Clean Up: Any Eco Friendly plastisol screen wash.

Warehouse Description Quantity Avail
10 Garston-East Hartford 8 EA
20 Garston-Haverhill 6 EA
30 Garston-Rochester 0 EA

Line Item Add

Item Number:
Unit of Measure: