Home page
Need help with your order?

Item Detail

IC902QT
International Coatings 902LF Nylon Black Ink - 1 QT (Catalyst Not Included)
Manufacturer Item:
Quantity Available: 0 QT
Sell Price: $26.55 QT
Next Quantity Break: 0
Next Quantity Break Discount: $0.00
Extended Price: $26.55
QT

 Extended Descriptions
 

APPLICATIONS

This ink has been an industry leader for over 10 years. As easy to use as a conventional plastisol and just as durable. International Coatings 902LF Nylon Black Ink is a fast flashing, 2 part plastisol based ink, specifically formulated for printing on normally hard to print nylon. This product is the 1 Quart container of ink.



INSTRUCTIONS FOR HANDLING & USAGE:

International Coatings 902LF Nylon Black Ink must be mixed with the 900 catalyst before printing. Catalyst is provided in 2 oz. and oz. containers should be thoroughly hand stirred into the ink. Ink may be used immediately after mixing. Do not mix more ink than is needed for a job. Do not under catalyze the ink. Pot life of mixed ink 4 to 8 hours. Over catalyzation will shorten pot life of ink.


Hand stir catalyst for International Coatings 902LF Nylon Black Ink:

  • 1 oz. Catalyst: 1 Pint Of Ink

  • 2 oz. Catalyst: 1 Quart Of Ink

  • 3 oz. Catalyst: 1 Gallon Of Ink  


Additional information For International Coatings 902LF Nylon Black Ink:

If necessary International Coatings 902LF Nylon Black ink may be thinned with 1% to 5% by volume, of mineral spirits or 1% to 5% by volume of 1110 Curable Reducer. It is important not to use reducers that are 100% plasticizer, because they may decrease adhesion and make the finished ink film less durable.



Technical Specifications of International Coatings 902LF Nylon Black Ink:

Fabric Types: Nylon, Cotton and some cotton/polyester blends. Always test print fabric for adhesion before beginning a production run.

Mesh: Count: 60 - 305 t/in (24 - 120 t/cm) Monofilament

Squeegee: Durometer: 70-80, Sharp Edge

Flash & Cure Temperatures: 300°F to 325°F (149°C to 163°C) entire ink film. Test dryer temperatures.

Storage: 65-90°F (18-32°C) Avoid direct sunlight. Keep container well sealed.

Clean Up: Any Eco Friendly plastisol screen wash or mineral spirits.


 Warehouses
 
Warehouse Description Quantity Avail
10 Garston-East Hartford 0 QT
20 Garston-Haverhill 0 QT
30 Garston-Rochester 0 QT
#

Line Item Add

Item Number:
Quantity:
Unit of Measure: